Shop

End Suction Pumps to ISO2858 for multiple applications. Speed range is up to 3000 rpm with flow capacity up to 3000 m3/h

End Suction Pumps to ISO2858 and ISO5199 for multiple applications. with flow capacity up to 1000 m3/hr GENERAL FEATU

FM Approved Fire pump packages   Fire pumps manufactured are in full compliance with the requirements of NFPA

Sewage Pumps has up to 3000m3/hr capacity, Speed up to 1500 rpm SW range of pumps has been designed to handle unscree

Split casing Pumps for over 60 models meet the standard requirements of all segments. Discharge range extends to 800 l/s

The FCMY107M5 & 108M5 Series Aviation Tank Units are designed for use in aviation refuelling systems with a maximum

Control valve BVMY1000 type 6” 300 lbs. x 4” 150 lbs. under-hydrant ball valve Provides positive and safe

BALL FLOAT VENT VALVES – VAPOR RECOVERY LINE STAGE II The RIDART BALL FLOAT VALVE is normally used in the vapor

The air operated pumps with a 45: 1 pressure ratio has a 10, 30, 50 Kg grease capacity with the following features

The Meggitt CCMY 8150-series stainless steel, self-sealing couplings are designed primarily for use in thepetroleum, che

2 1/2-inch self sealing industrial couplings

1 1/2 and 2-inch stainless steel self sealing coupling

Meggitt self sealing couplings are designed for use wherever it is necessary to connect and disconnect hoses and pipelin

1 1/2-inch self sealing industrial couplings Material  Gunmetal Weight 2.3 kg (5 lb) Max. Working Pre

Meggitt self sealing couplings are designed for use wherever it is necessary to connect and disconnect hoses and pipelin

2 1/2-inch self sealing industrial couplings TANK UNIT THREADED VERSION Materials Gunmetal, St/Steel,  S

• Low cost • Fail safe tank units • Unrivalled quality for trouble free operation and long life

Materials Gunmetal, St/Steel, structural plastic  Weight 6.5 kg (14.5lb) Max. Working Pressure 75 psi (1

Meggitt self sealing couplings are designed for use wherever it is necessary to connect and disconnect hoses and pipelin

Meggitt self sealing couplings are designed for use wherever it is necessary to connect and disconnect hoses and pipelin

The CCMY 8150-series stainless steel, self-sealing couplings are designed primarily for use in the petroleum, chemical a

1 1/2 and 2-inch stainless steel self sealing coupling Material 316 stainless steel Weight 3.59 kg Max. wo

2 1/2 and 3-inch stainless steel self sealing industrial couplings

A sliding piston automatically adjusts the pressure drop through the valve by reducing or increasing flow area. The pist

Operation: Lower the coupler from the vehicle stowage. Wheel the coupler into position over the pit valve. Turn the l

The CCMY8500M2 Series 4-inch A.P.I. Coupler has been designed to comply with all the operational and test requirements o

The CCMY8500M3 Series Four-inch A.P.I. Coupler has been designed to comply with all the operational and test requirement

The F211 2.5-inch coupler is a lightweight rugged version of the Meggitt underwing nozzle modified for use in connecting

The Meggitt air set pressure control coupler is designed to mate with EI standard hydrants or hydrants and adapters manu

The Meggitt 4-inch bottom loading coupler is designed in accordance with API RP1004. Features: Push-on, pull-off,

The Meggitt 3-inch bottom loading coupler is designed for the use in bulk plant system where the standard 4 inch API F22

The Meggitt F250 hydrant coupler is designed to connect to 4-inch hydrants and adaptors manufactured in accordance to AP

The Meggitt family of line mounted control valves for aircraft refueller and hydrant service applications are available

The Hydrant Shutoff Valve provides the means of controlling ON/OFF flow control in aircraft refueling operations. The va

All 3 inch valves use the same body and piston design All 4 inch valves use the same body and piston design working

Meggitt hydrant valves are in use world-wide, refuelling aircraft of all descriptions. Hydrant valves for use as primary

These Meggitt valves can be used as shutoff valves in any fuel system. The application of either air or fuel pressure to

F412 Two-way API adaptor The Meggitt F412 straight bottom loading two-way adaptor, made in accordance with the latest re

The F414 adaptor is designed in accordance with API RP1004 to mate couplers F240, F250 and F228 if used for bottom

Meggitt offers a wide variety of configurations and sizes of highly reliable bottom loading adapters. These units with p

The F509. The new design offers safety from accidental opening of the valve during fueling operations. During defueling

The F430355 and F430375 Dry Break Quick Disconnects are designed for use with underwing aircraft fueling nozzles. This n

Three-inch, four-inch, four-inch x three-inch and six-inch venturis Whittaker venturis are designed for use in fuelli

Simple construction - no moving parts to wear out • Bayonet flange and locking lug for positive locking and sealing

Meggitt air/fuel sense quick couplings are designed to transmit both air and fuel pressure from a hydrant servicing vehi

The Meggitt float pilot valve is designed to withstand the vibration and road shock inherent in tank truck systems avail

Jet Level Sensor provides high level control for bottom loading systems without the use of moving parts. There are no pa

The Meggitt bottom loading system designed for aircraft refuelers utilizes the unique jet level sensor in conjunction wi

Meggit has a line of delivery hose swivels that provide excellent swiveling characteristics and yet utilize no ball bear

Meggitt’s refueler/transport bottom loading system combines many features not previously available. This system ca

Meggitt F646 Series 5.25 inch vents are designed in accordance with DOT MC306 specifications and will mate with a standa

Designed specifically to prevent any fuel spillage in the pit from escaping and contaminating the surrounding area, the

The Hose End Pressure Control Valve provides the means of controlling higher flow rates in aircraft refueling operations

• Choice of three different types of handle • Six slot engagement for easier coupling location overhead

OPERATION All valve types use a common body and are hydraulically controlled using line pressure to open or close the

BALL FLOAT VENT VALVES – VAPOR RECOVERY LINE STAGE II The RIDART BALL FLOAT VALVE is normally used in the vapor

BALL FLOAT VENT VALVES – VAPOR RECOVERY LINE STAGE II The RIDART BALL FLOAT VALVE is normally used in the vapor r

The F116 Nozzle is a medium weight Meggitt standard size nozzle designed for regular duty at commercial airports worldwi

BALL FLOAT VENT VALVES – VAPOR RECOVERY LINE STAGE II The RIDART BALL FLOAT VALVE is normally used in the vapor

ACCESSORIES FOR VAPOR RECOVERY LINE STAGE I

COUPLINGS AND ACCESSORIES

The F145 single point nozzle is smaller and lighter in weight, yet maintains the strength, durability and robust design

The pneumatic valve is available as standard on new PVMY1000M3 and PVMY2010M3 pit valves or as a simple retrofit to exis

• Compatible with all hydrant couplers conforming to EI and API recommendations • Meets all the requirement

• Meets all requirements of the EI and API 3rd Edition recommendations • Lanyard, air operated or dual pivot v

Meggitt nozzles, swivels and disconnects, are designed to provide an ability to custom build a nozzle system to meet a c

EMERGENCY SHEAR VALVES The single and double poppet emergency SHUT-OFF VALVE is installed in the fuel delivery line and

The anti-siphon valves is recommended for all aboveground storage applications to prevent fuel from exiting the storage

The Meggitt Under Hydrant Valve is one of the most essential parts of a Hydrant System. Should the isolation feature in

VAPOR RECOVERY ADAPTER (CAMLOCK COUPLINGS) RIDART VAPOR RECOVERY ADAPTER are normally used in the vapour recovery line

API ADAPTER FUEL TRANSFER VALVES The adapter API RP 1004 is used to prevent any possible leaking during the process of

VAPOR RECOVERY ADAPTER (CAMLOCK COUPLINGS) RIDART VAPOR RECOVERY ADAPTER are normally used in the vapour recovery line

VAPOR RECOVERY ADAPTER (CAMLOCK COUPLINGS) RIDART VAPOR RECOVERY ADAPTER are normally used in the vapour recovery line

VAPOR RECOVERY ADAPTER (CAMLOCK COUPLINGS) RIDART VAPOR RECOVERY ADAPTER are normally used in the vapour recovery line

API ADAPTER FUEL TRANSFER VALVES The adapter API RP 1004 is used to prevent any possible leaking during the process of

API ADAPTER FUEL TRANSFER VALVES The adapter API RP 1004 is used to prevent any possible leaking during the process of

API ADAPTER FUEL TRANSFER VALVES The adapter API RP 1004 is used to prevent any possible leaking during the process of

API ADAPTER FUEL TRANSFER VALVES The adapter API RP 1004 is used to prevent any possible leaking during the process of

API ADAPTER FUEL TRANSFER VALVES The adapter API RP 1004 is used to prevent any possible leaking during the process of

VAPOR RECOVERY ADAPTER (CAMLOCK COUPLINGS) RIDART VAPOR RECOVERY ADAPTER are normally used in the vapour recovery line

API ADAPTER FUEL TRANSFER VALVES The adapter API RP 1004 is used to prevent any possible leaking during the process of

VAPOR RECOVERY ADAPTER (CAMLOCK COUPLINGS) RIDART VAPOR RECOVERY ADAPTER are normally used in the vapour recovery line

VAPOR RECOVERY ADAPTER (CAMLOCK COUPLINGS) RIDART VAPOR RECOVERY ADAPTER are normally used in the vapour recovery line

COUPLINGS AND ACCESSORIES

It’s a Protection System with ribbon coil: deflagration in-line flame arrester in according with Directive 2014/34

COUPLINGS AND ACCESSORIES

COUPLINGS AND ACCESSORIES

ACCESSORIES FOR VAPOR RECOVERY LINE STAGE I

The ACTIVE COAL VENT RIDART VALVE is a required safety device near residential areas. Inside the valve there are active

ACCESSORIES FOR SUCTION LINE The ANGLE CHECK VALVE is a device in according with Directive 2014/34/EU and harmonized

EMERGENCY SHEAR VALVES The single and double poppet emergency SHUT-OFF VALVE is installed in the fuel delivery line and

MEASURING ACCESSORIES

EMERGENCY SHEAR VALVES The single and double poppet emergency SHUT-OFF VALVE is installed in the fuel delivery line and

EMERGENCY SHEAR VALVES The single and double poppet emergency SHUT-OFF VALVE is installed in the fuel delivery line and

EMERGENCY SHEAR VALVES The single and double poppet emergency SHUT-OFF VALVE is installed in the fuel delivery line and

EMERGENCY SHEAR VALVES The single and double poppet emergency SHUT-OFF VALVE is installed in the fuel delivery line and

EMERGENCY SHEAR VALVES The single and double poppet emergency SHUT-OFF VALVE is installed in the fuel delivery line and

MEASURING ACCESSORIES

OTHER

other

ABOVEGROUND STORAGE TANK The ANTI-SIPHON VALVE is designed to prevent siphoning of liquid from an aboveground tank to t

ACCESSORIES FOR LOADING LINE VAPOR STOP RIDART is used to prevent any possible vapors exposure after the cap opening

ACCESSORIES FOR LOADING LINE VAPOR STOP RIDART is used to prevent any possible vapors exposure after the cap opening wh

ACCESSORIES FOR LOADING LINE VAPOR STOP RIDART is used to prevent any possible vapors exposure after the cap opening wh

ACCESSORIES FOR LOADING LINE VAPOR STOP RIDART is used to prevent any possible vapors exposure after the cap opening wh

EASURING ACCESSORIES

MEASURING ACCESSORIES

MEASURING ACCESSORIES

It is a devic e in ac c ordanc e with Directive 2014/34/EU and the harmonised standard. Gauging plug Ridart are produc

It is a devic e in ac c ordanc e with Directive 2014/34/EU and the harmonised standard. Gauging plug Ridart are produc

ACCESSORIES FOR SUCTION LINE The ANGLE CHECK VALVE is a device in according with Directive 2014/34/EU and harmonized

ACCESSORIES FOR SUCTION LINE The ANGLE CHECK VALVE is a device in according with Directive 2014/34/EU and harmonized

QUICK DRY COUPLER FUEL TRANSFER VALVES The RIDART QUICK DRY is used to prevent any possible leaking during the process

It’s a Safety accessory in according with Directives ATEX 2014/34/EU and PED 2014/68/UE. The dry quick coupling is

N LINE DEFLAGRATION FLAME ARRESTER VALVES The In Line Flame Arrester Rid art is a Protection System with stainless Stee

Ridart 181 ENP a Protection System with ribbon coil: deflagration in-line flame arrester in according with Directiv

It’s a Protection System with ribbon coil: deflagration in-line flame arrester in according with Directive 2014/34

PRESSURE VACUUM VENT WITH END OF LINE DEFLAGRATION FLAME ARRESTER Pressure Vacuum Valve with ribbon coil is a Protec

PRESSURE VACUUM VENT WITH END OF LINE DEFLAGRATION FLAME ARRESTER Pressure Vacuum Valve with ribbon coil is a Protec

PRESSURE VACUUM VENT WITH END OF LINE DEFLAGRATION FLAME ARRESTER Pressure Vacuum Valve with ribbon coil is a Protec

PRESSURE VACUUM VENT WITH END OF LINE DEFLAGRATION FLAME ARRESTER Pressure vacuum vent model 197 can be manufactured b

ACCESSORIES FOR SUCTION LINE The ANGLE CHECK VALVE is a device in according with Directive 2014/34/EU and harmonized

N LINE DEFLAGRATION FLAME ARRESTER VALVES The In Line Flame Arrester Rid art is a Protection System with stainless Stee

N LINE DEFLAGRATION FLAME ARRESTER VALVES The In Line Flame Arrester Rid art is a Protection System with stainless Stee

N LINE DEFLAGRATION FLAME ARRESTER VALVES The In Line Flame Arrester Rid art is a Protection System with stainless Stee

N LINE DEFLAGRATION FLAME ARRESTER VALVES The In Line Flame Arrester Rid art is a Protection System with stainless Stee

It’s a Safety Device in according with Directives ATEX 2014/34/EU, EN ISO 13616-1:2016, EN ISO 80079-36:2016, Tech

It’s a Safety Device in according with Directives ATEX 2014/34/EU, EN ISO 13616-1:2016, EN ISO 80079-36:2016, Tech

It’s a Safety Device in according with Directives ATEX 2014/34/EU, EN ISO 13616-1:2016, EN ISO 80079-36:2016, Tech

It’s a Safety Device in according with Directives ATEX 2014/34/EU, EN ISO 13616-1:2016, EN ISO 80079-36:2016, Tech

It’s a Safety Device in according with Directives ATEX 2014/34/EU, EN ISO 13616-1:2016, EN ISO 80079-36:2016, Tech

It’s a Safety Device in according with Directives ATEX 2014/34/EU, EN ISO 13616-1:2016, EN ISO 80079-36:2016, Tech

It’s a Safety Accessories in according with Directive 2014/34/EU and harmonized standard EN ISO 13616. The valve i

ACCESSORIES FOR SUCTION LINE The ANGLE CHECK VALVE is a device in according with Directive 2014/34/EU and harmonized

ACCESSORIES FOR SUCTION LINE The ANGLE CHECK VALVE is a device in according with Directive 2014/34/EU and harmonized

ACCESSORIES FOR SUCTION LINE The ANGLE CHECK VALVE is a device in according with Directive 2014/34/EU and harmonized

ACCESSORIES FOR SUCTION LINE The ANGLE CHECK VALVE is a device in according with Directive 2014/34/EU and harmonized

ACCESSORIES FOR SUCTION LINE The ANGLE CHECK VALVE is a device in according with Directive 2014/34/EU and harmonized

ACCESSORIES FOR SUCTION LINE The ANGLE CHECK VALVE is a device in according with Directive 2014/34/EU and harmonized

ACCESSORIES FOR LOADING LINE VAPOR STOP RIDART is used to prevent any possible vapors exposure after the cap opening wh

ACCESSORIES FOR LOADING LINE VAPOR STOP RIDART is used to prevent any possible vapors exposure after the cap opening

ACCESSORIES FOR LOADING LINE VAPOR STOP RIDART is used to prevent any possible vapors exposure after the cap opening

MEASURING ACCESSORIES

Standard  Features: The  Model  SJE_94122  Floating Suction Unit operates  in  hor

These demand regulators are basically the same units as the Meggitt air set valves except they utilize an adjustable spr

3-inch and 4-inch bottom loading shutoff valves for use with either the jet level sensor or float pilot valves. Refer to

Fits into standard 18-inch pit externals with 6-inch ANSI class 300 flange • Incorporates two 1.5-inch fire safe ba

The F117 nozzle is designed to be used where heavy duty use is expected. The F117 provides a positive leak tight connect

PRESSURE VACUUM VENT WITH END OF LINE DEFLAGRATION FLAME ARRESTER Pressure vacuum vent model 197 can be manufactured b

BRAKE FLUID DOT-3 500ML, BOX OF 25 PCS

Break Fluid Dot-4 500 ML, Box of 25 Pieces 

GEAR OIL EP-140 (API GL 5) SAE 140 20LTR, PAIL

GEAR OIL EP-140 (API GL 5) SAE 140 208LTR, DRM

GEAR OIL EP-90 (API GL 5) 20LTR, PAIL

GEAR OIL EP-90 (API GL 5) 208LTR, DRM

GREASE HIGH TEMPRATURE 180KG, DRM

GREASE HIGH TEMPRATURE 18KG, PAIL

HYDRAULIC OIL 32 HLP 208LTR, DRM

HYDRAULIC OIL 32 HLP 20LTR, PAIL

HYDRAULIC OIL ISO 68 208LTR, DRM

HYDRAULIC OIL ISO 68 20LTR, PAIL

HYDRAULIC OIL AW 46 208LTR, DRM

HYDRAULIC OIL AW 46 20LTR, PAIL

ENGINE OIL 20W50 API SM/CI-4 20LTR, PAIL

ENGINE OIL 20W50 API SM/CI-4 208LTR, DRM

DIESEL ENGINE OIL SAE 50 208LTR, DRM

DIESEL ENGINE OIL SAE 50 20LTR, PAIL

ENGINE OIL 15W40 API CI-4/SL 208LTR, DRM

ENGINE OIL 15W40 API CI-4/SL 20LTR, PAIL

ENGINE OIL SAE 40 API CI-4 208LTR, DRM

ENGINE OIL SAE 40 API CI-4 20LTR, PAIL

ATF TRANMISSION FLUID (DEXTRON II) 20LTR, PAIL

ATF TRANMISSION FLUID (DEXTRON II) 4LTR, BOX OF 6PCS

ATF TRANMISSION FLUID (DEXTRON II) 1LTR, BOX OF 12PCS

ATF TRANMISSION FLUID (DEXTRON II) 208LTR, DRM

ENGINE OIL 10W40 API CI-4/SL 20LTR, PAIL

ENGINE OIL 10W40 API CI-4/SL 208LTR

ENGINE COOLANT 50% 1LTR, BOX OF 12PCS

ENGINE COOLANT 50% 4LTR, BOX OF 6PCS

ENGINE COOLANT 50% 20LTR, PAIL

Suction distance:1.5m Lift distance:5m Flow rate:22L/min+ , 108*17*17 5PCS/CTN - (23.5/24.5 KG)

Suction distance:1.5m Lift distance:5m Flow rate:30L/min Aluminum material , 76*39*32 10PCS/CTN - (23/24 kg)

Suction distance:1.5m Lift distance:5m Flow rate:30L/min , 48*29*33 10PCS/CTN - (20/22 KG)

Suction distance:1.5m Lift distance:5m Flow rate:22L/min , 122*36*40 30PCS/CTN - (8.6/12 KG)

Suction distance:1.5m Lift distance:5m Flow rate:30L/min , 62*50*39 10PCS/CTN -  (19/20 KG)

Suction distance:1.5m Lift distance:5m Flow rate:32L/min , 84*28*21 10PCS/CTN - (20/22 kg)

Suction distance:1.5m Lift distance:5m Flow rate:30L/min 304SS material , 78*38*28 10PCS/CTN (35/36 KG)

Size:1/2” Flow rate:15L/min , 105*47*47 30PCS/CTN - (153/154 KG)

Flow rate:30L/min , 69*43*27 20PCS/CTN - (9/10KG)

Suction distance:4m Lift distance:20m Flow rate:40L/min Size:1” , 44*31*21 2PCS/CTN (17.2/18.2 KG))

Ratio:1:1 Flow Rate:23L/min Suction tube length:270mm , 62*18*22 4PCS/CTN (20/21 KG)

Ratio:1:1 Flow Rate:23L/min Suction  tube length:940mm , 133*18*22 4PCS/CTN (32/33 KG)

Ratio:3:1 Flow Rate:14L/min Suction tube length:730mm , 94*18*22 4PCS/CTN - (24/25 KG)

Ratio:3:1 Flow Rate:14L/min Suction tube length:940mm , 122*18*22 4PCS/CTN - (24/25 KG)

Ratio:5:1 Flow Rate:18L/min Suction  tube length:730mm , 42*35*34 1PC/CTN  - (16/17 KG)

Ratio:5:1 Flow Rate:18L/min Suction  tube length:730mm , 42*35*34 1PC/CTN - (16/17 KG)

Ratio:5:1 Flow Rate:18L/min Suction tube length:940mm , 50*40*44 10PCS/CTN - (11/12 KG)

Size:1/2” Flow rate:40L/min , 42*71*8 10PCS/CTN - (6.2/7.2 KG)

Size:1/2” Flow rate:40L/min , 66*40*37 10PCS/CTN (15/16 KG)

Size:1/2” Flow rate:0-40L/min , 57*40*28 40PCS/CTN - (17/18 KG)

Size:1/4” , 49*32*28 40PCS/CTN (16/17 KG)

Size:1/4” , 49*32*28 20PCS/CTN - (16/17 KG)

Oil Drum Trolley Suitable for 20-60L drum , 46*46*10 1PC/CTN - (14/15 KG)

Oil Drum Trolley Suitable for 20-60L drum , 46*46*10 1PC/CTN - (14/15 KG)

Size:1/2” Hose length:15m , 54*28*57 1PC/CTN - (21/22 KG)

Capacity:1L , 54*28*57 1PC/CTN - (16/17 KG)

Capacity:3L , 95*70*12 1PCS/CTN 20/21KG

Capacity:5L , 54*28*57 1PC/CTN 16/17KG

3:1 ratio pump  Digital meter gun Drum Trolley TPOT-02 4m discharge hose , / 33/34KG

5:1 ratio pump Digital meter gun Drum Trolley TPOT-02 4m discharge hose , / 34/35KG

The mobile oil dispensing kit includes a hose reel with a digital pre-set meter gun to dispense pre-set oil volumes &

The mobile oil dispensing kit includes a hose reel with a digital pre-set meter gun to dispense pre-set oil volumes 5

Manual grease gun Capacity:450g , 39*26*33 10PCS/CTN 13/14KG

Electric grease gun Capacity:450g , 54*53*44 5PCS/CTN 34.5/36KG

Ratio:50:1 Flow Rate:1.5kg/min Suction tube length:480mm Suitable for 20kg drum , 78*18*22 4PCS/CTN 20/21KG

Ratio:50:1 Flow Rate:1.5kg/min Suction tube length:740mm Suitable for 60kg drum , 104*18*22 4PCS/CTN 22/23KG

Ratio:50:1 Flow Rate:1.5kg/min Suction tube length:940mm Suitable for 180kg drum , 122*18*22 4PCS/CTN 24/25KG

Manual grease pump Suitable for 16-30kg drum , 57*57*39 8PCS/CTN 22/26KG

Barrel Capacity:8kg , 57*26*51 2PCS/CTN 9/10KG

Barrel Capacity:12kg , 57*26*54 2PCS/CTN 11/12KG